The duration value will be gradually adjusted during the execution of the drying cycle.
10.Press the START/PAUSE button. The relevant light will stop flashing. The message relevant to
| Reset/ |
|
Memory2 | Off | Cotton extra dry |
| ||
Memory1 |
| Ready to wear |
Cooling |
| Store dry |
30 min |
| Slightly damp |
60 min |
| Iron dry |
Baby |
| Machine iron dry |
Iron dry | Store dry Synthetic extra dry | |
Cotton extra |
|
| 08.30 | |
Cycle end at |
|
| 10.55 | |
| 1200 |
|
|
|
Door | Spin | Options | Change | Exit |
the phase that is in progress will be shown in the display.
If you have chosen a delayed start, the tumble dryer will begin the countdown.
Start/ |
|
|
|
|
|
Pause | Cotton extra |
|
| 08.30 | |
| Drying |
|
|
| 10.55 |
|
| 1200 |
|
|
|
| Door | Spin | Options | Change | Exit |
7.Press the SPIN button repeatedly, in order to select the real spin speed that your laundry has been spun. The selected spin level will be shown on the third row above to the spin button.
Cotton extra |
|
| 08.30 | |
Cycle end at |
|
| 10.55 | |
| 1200 |
|
|
|
Door | Spin | Options | Change | Exit |
8.Press the «Options» button to select the required options.
To confirm your choice press the «Change» button.
Depending on the selected programme only certain options are available and shown during the selection phase.
Note: Not all the options are compatible between themselves. The incompatible option icons will disappear.
9.Select the DELAY START option if required. Before you start the programme choose the required option.
The selected delay time value (up to 20 hours) will appear on the display while selecting.
The end cycle will be updated and shown on the relative position of the display.
If the programme selector dial is turned to another position, when the machine is running, the buzzer will sound and the «Selection error» message appears in the display.
The drum turns alternately in both directions during drying.
All drying programmes end with a 10 minute cooling phase (on the second row of the display appears the «Cooling» message).
You may remove the laundry after this phase.
The display shows the following messages one after an other: «Please clean the filters» and «Please empty the tank». The buzzer sounds to indicate the end of the cycle.
11.If the laundry is not removed at the end of the cycle, the dryer performs an
If you do not remove the laundry, the dryer will stop automatically at the end of the
The light of the START/PAUSE button goes off and a flashing zero appears on the display.
12.Turn the programme selector dial to “RESET/ OFF”; all the lights go out. The appliance is
Delay Start |
|
|
| |
No |
|
|
| 10.55 |
Door | Spin | Options | Change | Exit |
Delay Start |
|
|
| |
Start in 30 min |
|
| 11.25 | |
Door | Spin | Options | Change | Exit |
switched off. Remove the laundry.
If you open and then close the door before turning the programme selector dial to “RESET/OFF”, the machine is ready to perform another drying programme. The display shows the selected programme, duration of the programme and the options required.
13
