156999480en.qxp 3/2/2006 8:11 AM Pagina 22
CAUTION!
If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.
Inlet hose
Connect the inlet hose to a water tap with an external thread of 3/4”.
The inlet hose can be turned either to the left or the right to suit the installation by means of the locknut.
The locknut must be correctly fitted to avoid water leaks.
Drain hose
-Connect drain hose to the sink. Secure it with the supplied hose clamp.
-Required height: 30 to 100 cm above bottom of the dishwasher.
-If you use a drain hose extension the total length should not be longer than 4 metres. Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided.
CAUTION!
Always be sure, that there is no water leakage from hoses and their connections after the installation.
Ensure that the hoses are not kinked, crushed or entangled.
22
