The hob

WARNING!

Only for the ceramic hob models: Do not use the appliance if the ceramic glass is damaged. If a fault or crack becomes visible, disconnect the appliance immediately from the electricity supply and contact your local service force cen- tre.

The highest number represents the hottest set- ting and the lowest number represents the coolest setting. Choose a setting appropriate to the quantity and type of food to be cooked.

Using the hob

The hob part of the appliance is controlled via a knob with 7 positions on the control panel. Position "0" means off position. The remaining

6 positions indicate the following types of use:

1:Heat maintenance position

2-3: Heating in low temperature position

4-5-6: Cooking, frying and boiling position

The knob rotation direction may differ according to the product specification. In case of ZKS5010 models surfaces of hotplates are covered by a protective layer. At first use, operate the hot- plates without a pan at level 3 for 5 minutes.This hardens the protective coating on the hob and

makes it more resistant to normal use. A harm- less smoke will be given off from the hob.

Recommended saucepans

Only saucepans with flat bases and close fitting lids are recommended. The saucepan base should be approximately the same size as the cooking area.

Ensure that new saucepans are well scrub- bed to remove edges and take off any de- posits left from manufacture.

Traditional round-bottomed Woks must not be used even with a stand. Woks with flat- bottomed bases are available and do comply with the above recommendations.

11

Page 11
Image 11
Zanussi ZKC5020, ZKS5010 user manual Hob, Using the hob, Recommended saucepans