Cleaning the outside of theappliance
Do not use abrasive cleaning materials e.g.
abrasive cream cleaners, wire wool pads or
scourers on painted or printed finishes as
damage may occur. Regularly wipe over the
control panel, control knobs, handles, doors
and appliance sides using a soft cloth and
hot soapy water. To prevent streaking, finish
with a soft cloth.
Stainless Steel cream cleaners are abrasive
and should be avoided as they may dull the
surface finish. Any spillage on the stain-
less steel finish must be wiped off
immediately.
WARNING!
Do not attempt to remove any of the control
knobs from the appliance as this may cause
damage and is a safety hazard.
Cleaning the solid hob(ZKS5010 )
Clean the hob after each use. To ensure the
best results from your hob and to prolong its
good looks regular cleaning and maintenance
is essential. Cleaning and maintenance should
only be carried out when the hob is cool.
Hob Surface
Hob surface should be cleaned with a lukewarm
solution of water and a mild detergent,
periodically it may be necessary to use a mild
scouring agent. Dust, fat and liquids from food
that has boiled over must be removed as soon
as possible. Never use a scouring pad on the
hob surface and on no occasion use a sharp
object.
Scratched or clipped surface cannot be re-
paired. In additional to the unsightly appear-
ance this may lead to grooves appearing and
eventually the enamel to crack.
Plates
To clean solid plates, firstly wipe off any excess
spillage and if necessary clean the plates with
a light abrasive pad than dry the plates
thoroughly.
General information
Drying may be facilitated by turning the
plates onto the lowest setting for a short time
until dry.
Do not put any damp or wet items on the
hotplates.
Dry pots and pans with a cloth before placing
them on the hotplates.
Cleaning the ceramic hob(ZKC5020S1/W1/X1-ZKC5030W1/S1/X1/ K1)
Make sure the ceramic glass is cool before
cleaning. It is important to clean the ceramic
hob daily to prevent foodstuff being burnt on.
Take care to avoid the hob trims when clean-
ing the ceramic glass as they may be dam-
aged by the cleaning agents.
22