Step 2: Clean the test strip holder. Wash the test strip holder with soap and water.
Clean the underside of the test strip hold- er. Using a cotton swab, clean the small hole to remove any dirt, blood, or lint. Rinse well.
Dry completely with a soft cloth or tissue.
Step 3: Clean the test area.
CAUTION:
Do not use the following agents for cleaning, as they will damage the meter:
•Alcohol
•Cleansers with ammonia or phenol
•Glass cleaners
•Abrasive cleaners
Check the clear, protective coating over the test area to make sure it is not scratched or dam- aged.
M | C |
64
