Step 1: Turn on the meter.
The code number will appear on the display. Next, INSERT CODE 10 (for example) STRIP will appear.
Step 2: Insert the check strip
Step 3: Remove the check strip.
When the message APPLY SAMPLE appears on the display, remove the check strip from the test strip holder.
Note: This is the only time you should remove a strip during a test.
Slide the notched end of the check strip into the test strip holder with the purple side facing up. After the check strip has been insert- ed, WAIT PLEASE appears for a mo- ment.
INSERT | |
M | C |
1
SAMPLE | |
M | C |
1
13
