SOLVING PROBLEMS
The display messages that appear on your One Touch™ Profile™ Meter will guide you through testing procedures, alert you to any problems as they occur, and give you informa- tion about test results stored in the meter’s memory. This section provides you with a com- plete listing of the display messages, what they mean, and what to do if there is a problem.
TEST PROCEDURE MESSAGES
MESSAGE | APPEARS WHEN |
CODE 10 | The meter is first turned on. The code number |
(for example) | meter must match the code number on the test strip vial. |
7:26 AM 6 01 00 |
|
|
|
INSERT | The meter is ready to perform a blood, check strip, or control |
CODE 10 (for example) | solution test. |
STRIP |
|
|
|
WAIT | The meter is performing internal checks. |
PLEASE |
|
|
|
APPLY | The meter is ready to receive a blood or control solution sample. |
SAMPLE | If performing a check strip test, this is your signal to remove the check |
| strip (purple side up) from the meter. |
52
