Zanussi ZKT631DX manual Problem Possible cause Remedy

Problem	Possible cause	Remedy
flashes	Unsuitable cookware	Use suitable cookware
	No cookware on the cooking	Place cookware on the cook-
	zone	ing zone
	The diameter of the bottom	Move onto a smaller cooking
	of the cookware is too small	zone
	for the cooking zone
		Use suitable cookware
is lit	Overheating protection for	Switch off the cooking zone.
	the cooking zone has been	Switch the cooking zone on
	triggered	again
	Safety cut-out has been trig-	Switch off the cooking zone.
	gered	Switch the cooking zone on
		again
and number are displayed	Electronics fault	Disconnect the appliance
		from the electrical supply for
		a few minutes (Take the fuse
		out of the house’s wiring sys-
		tem)
		If after switching on again,
		is displayed again, call the
		customer service department
and minus are displayed	Light rays that are too strong	Briefly shade the control pan-
	on the control panel, for ex-	el, for example with the hand
	ample bright sunlight	Acoustic signal sounds, ap-
		pliance switches itself off
		Switch appliance on (again)

If you are unable to remedy the problem by following the above sug- gestions, please contact your local Service Force Centre.

1Warning! Repairs to the appliance are only to be carried out by qualified service engineers. Considerable danger to the user may result from improp- er repairs.

3If the appliance has been operated incorrectly, the visit from the service technician or dealer may not take place free of charge, even during the war- ranty period.

23