1. Switch the oven function control knob to fan

The cooling fan

The cooling fan is designed to cool the the oven and the control panel. The fan switches on automatically after a few minutes of cooking. Warm air is blown out through the aperture near the oven door handle. When the oven is switched off, the fan may run on after the oven is switched off to keep the controls cool. This is quite normal.

The action of the cooling fan will depend on how long the oven has been used and at what temperature. It may not switch in at all at lower temperature settings nor run on where the oven has only been used for a short time.

Before using the oven for the first time

Remove all packaging, both inside and outside the oven, before using the oven.

Before using for the first time, the oven should be heated up without food.

During this time, an unpleasant odour may be emitted. This is absolutely normal. It is caused by manufacturing residues.

The oven will only work if the time of day has been set.

Ensure the room is well ventilated.

) cooking .

2. Set the thermostat control knob to 250.

3. Open a window for ventilation.

4. Allow the oven to run empty for approximately

45 minutes.

This procedure should be repeated with the Grill function for approximately 5-10 minutes.

Then let the oven cool down. Then dampen a soft cloth with warm water and a little mild washing-up liquid and use this to clean the oven cavity.

Before using for the first time, carefully wash the oven accessories as well.

To open the oven door, always hold the handle in the centre.

25

Page 25
Image 25
Zanussi ZOB 460 Before using the oven for the first time, Cooling fan, Oven will only work if the time of day has been set