2x 3,5x25
Electrical installation
Warning! Only a qualified and competent person must do the electrical installation.
The manufacturer is not responsible if you do not follow safety precautions from chapter "Safety".
This appliance is supplied without a main plug and a main cable.
Applicable cable types : H07
Electrical Installation
•Enquiries regarding the installation of the cooker point, if required, should be made to your Regional Electricity Company to ensure compliance with their regulations.
•The appliance socket switch should be outside the cab- inet but within 2m of the appliance to make it accessi- ble to switch off the appliance in case of an emergency.
•To protect the hands, wear gloves when lifting the oven into its housing.
Important! HOUSE CIRCUIT
Earth leakage and continuity tests must be carried out before the appliance is connected to the mains supply and
GETTING THINGS READY CHOICE OF ELECTRICAL CONNECTION
There are three possible ways to connect your appliance. In each case the appliance should be operated using at least 6mm² twin core and earth PVC insulated multicore
cable. Please choose from the most appropriate after read- ing the different methods :
a)By connecting to a cooker point (having a double pole isolating switch with at least 3mm contact sepa- ration in all poles and neutral) and protected with a fuse or miniature circuit breaker at your mains fuse box.
b)By connecting the appliance together with a hob di- rectly to a cooker point(s). Having a double pole iso- lating switch with at least 3mm contact separation in all poles and neutral.
c)If you wish to connect an oven and a hob to a cooker point you can by connecting the oven and hob sepa- rately to the cooker point. Oven and hob units should be separately connected to a cooker point. (See Pic- ture)
1
32
21
