Zanussi ZSF2450 manual Cleaning the spray arm, External cleaning, Frost precautions

Models: ZSF2450

1 20
Download 20 pages 38.53 Kb
Page 12
Image 12
Cleaning the spray arm

A

B

12

Remove the filters A and B from the bottom of the appliance.

2

1

34

Fully clean the filters below running water.

External cleaning 1

2

5

Put the filters back. Turn the microfilter clockwise to lock it.

Cleaning the spray arm

Regularly examine the spray arm. Remove re- maining food from the holes in the spray arm. Do these steps to remove and to put the spray arm back:

12

12

3

External cleaning

Clean the external surfaces of the appliance and control panel with a damp soft cloth. Only use neutral detergents. Do not use abrasive products, scouring pads or solvents (acetone, trichloro- ethylene etc...).

Frost precautions

Caution! Do not install the appliance where the temperature is below 0 °C. The

manufacturer is not responsible for damage because of frost.

If not possible, empty the appliance and close the door. Disconnect the water inlet hose and re- move water from the water inlet hose.

Long periods of non-operation

Do these steps when you do not use the appli- ance for a long period:

1.Disconnect the mains plug from the mains socket.

2.Close the water tap.

3.Keep the door open to prevent unpleasant smells.

4.Keep the inner side of the appliance clean (filters especially).

Page 12
Image 12
Zanussi ZSF2450 manual Cleaning the spray arm, External cleaning, Frost precautions, Long periods of non-operation