Zanussi ZSF2450 Installation, Water connection, Fitting the appliance, Positioning, Inlet hose

Models: ZSF2450

1 20
Download 20 pages 38.53 Kb
Page 15
Image 15
Installation

household waste disposal service or the shop where you purchased the product.

The packaging materials are environmentally friendly and can be recycled. The plastic compo- nents are identified by markings, e.g. >PE<, >PS<, etc. Discard the packaging materials in the appli- cable container at the community waste disposal facilities.

Warning! To discard the appliance, follow the procedure:

Pull the mains plug out of the socket.

Cut off the mains cable and mains plug and discard them.

Discard the door catch. This prevents the chil- dren to close themselves inside the appliance and endanger their lives.

Installation

Warning! Make sure that mains plug is disconnected from the mains socket during

installation.

Fitting the appliance

Put the appliance adjacent to a water tap and a drain.

When you put the appliance in place, make sure that the water hoses are not kinked or squashed. Install the appliance on a kitchen sink, worktop or built-in..

Adjusting the level of the appliance

Make sure that the appliance is level to close and seal the door correctly. If the level of the appli- ance is correct, the door does not catch on the sides of the cabinet. If the door does not close correctly, loosen or tighten the adjustable feet until the appliance is level.

Positioning

min. 450+5

min. 500Fitting the appliance

min. 550

Install the dishwasher into the furniture of the kitchen.

Make sure that the di- mensions of the recess agree with the given dimensions.

Make sure that there are openings in the furniture for the inlet hose, the water drain hose and the mains ca- ble.

Water connection

Inlet hose

The appliance has safety features to prevent that the water in the appliance goes back

into the drinking water system.

Connected the appliance to a hot (max. 60°) or cold water supply.

If the hot water comes from alternative sources of energy that are more environmentally friendly (e.g. solar or photovoltaic panels and aeolian), use a hot water supply to decrease energy consump- tion.

It is important that a water tap or stopcock is near the dishwasher with easy access.

15

Page 15
Image 15
Zanussi ZSF2450 Installation, Water connection, Fitting the appliance, Adjusting the level of the appliance, Positioning