Media Length Sensing
Before you connect the printer to your computer, make sure that the printer is in proper working order. You can do this by making the printer measure media and print a status printout.
UKQ2933H U V4.28.19 |
Serial port : 96,N,8,1 |
Image buffer size:1032K Fmem:000,0K,060.9K avl Gmem:000K,0331K avl Emem:000K,0331K avl I8,0,001 rY JF WY
S2 D07 R024,000 ZT 
q1200 Q1500,036 
Option: 
oRO
06 10 16 now in DUMP
After loading media, perform the following procedure that measures the length of each label or tag. Make sure the top cover of the printer is closed.
1.Make sure that printer power is off.
2.Press and hold the feed button.
3.Turn printer power on.
4.When the status light blinks, release the feed button.
5.The printer advances the media to measure and verify the length of individual labels or tags. The printer then prints a status summary and remains in diagnostic dump mode.
6.To begin normal operation, tap the feed button. The printer prints "out of DUMP" and advances a label.
If the status light remains amber or red or you cannot get this printout, refer to Troubleshooting on page 33.
out of DUMP
12 |
|
