Printing in Peel-Mode
ON | OFF |
The optional dispenser allows you to print in
label backing follows a different path and the labels are presented one at a time for subsequent placement.
1.Remove several labels from the backing material.
2.Open the top cover.
3.Open the dispenser door.
4. | Switch on the |
5. | Insert the backing in front of the peel |
| bar and behind the peel roller. |
6. | Close the dispenser door. |
7. | Close the top cover. |
8. | Press the Feed button to advance the |
| label. |
During the print job, the printer will peel | |
off the backing and present a single label. | |
Take the label from the printer so it will | |
print the next label. | |
| 21 |
