Zebra Technologies P420 user manual Ready

READY

Next

PRINTER INFO

Next

CLEANING MENU

Next

SELF TEST MENU

PRINTER DEFAULTS

Select	Next
	Printer Model Number
	Printer Firmware Version
	Number of impressions
	Reject Box Status
	To show the number of cards remaining in the
	reject box

Select GO TO MAIN MENU Next

Select	Next
	CLEAN PRINT HEAD	Select
	To clean the Thermal Print
	Head and card transport system		To run
			cleaning
	CLEAN MAG.HEAD*	Select
	To clean the magnetic
	Encoder Head
Select	GO TO MAIN MENU	Next
Select	Next
	TEST PATERN	Select
	To print a printer test card
	PRINT PARAMETERS	Select		To run
	To print a test card showing
				printing
	the operating parameter settings of the printers
	MAG - PARAMETERS*	Select
	To print a test card showing the operating
	parameter settings of magnetic encoder.
Select		Next
	GO TO MAIN MENU
Select	Next
	Ribbon type
	To show the type of ribbon installed.
	It may not match the ribbon physically installed
	until the installed ribbon has been selected through
	the driver

Offset X: aa-Y:bb

To show the X print location offset value in pixels (aa)

To show the Y print location offset value in pixels (bb)

Mag. Option: cccc

To show the setting of the magnetic encoder as (cccc), which can be:

-HICO (high coercivity)

-LOCO (low coercivity)

-NONE (no encoder present)

Color Parameters

To show the intensity values of Yellow (Y), Magenta (M) and Cyan (C) panels and contrast value of Black Resin (K) Panel.

Select		Next
	GO TO MAIN MENU

OPERATION 17