Zebra Technologies P420 user manual Cleaning System, HOW to Clean

4.1 Cleaning System

Your P420 Printer includes a simple cleaning system using the Pre-Saturated Cleaning Cards provided. The regular use of these cards will clean and maintain important parts of your printer: including the Print Head, and Transport Rollers.

CLEAN PRINTER

WHEN TO CLEAN

When LCD screen reports message.

HOW TO CLEAN

1.Leave power on.

Open Cover and release Print Head Bracket to remove ribbon.

Close Print Head bracket.

Close Cover. Remove cards from Card Feeder.

2. Insert one Pre-Saturated Cleaning Card

(provided) through slot on the side of the Card Feeder Cover.

3.Press the right Panel Button for a few seconds. The card will feed into printer and carry out the cleaning process. Repeat the process with a new Cleaning Card if necessary.

Note: For a printer cleaning prior to the WHEN TO CLEAN signal, press the Left Panel Button until the LCD screen shows "CLEANING MENU". Press the right Panel Button to select and one more time again to run the cleaning process (Repeat first steps 1 & 2 above).

Although the CLEAN PRINTER message is displayed until the cleaning process has been performed, the printer will continue to operate.

24 CLEANING