^SC: Use the Set Communications (^SC) command to change the communications settings on the printer. With the host computer set at the same communications settings as the printer, send the ^SC command to change the printer to the desired settings. Then, change the host computer settings to match the printer settings.
6HWWLQJ8SWKH6RIWZDUH
In order to create labels, you must decide whether to use ZPL II or commercial label preparation software. To use ZPL II, refer to the ZPL II Programming Guide. If you choose to use a label preparation software, follow the installation instructions included in the package.
26 | Zebra S400 & S600 User’s Guide |
