Zenith HW20H52DT, H20H52DT 14-I. Strt CH in SM, 15-I. Sleep Timer, 16-I. EN. Timer, 17-I. Alarm

Installer Menus

Installer Menu Items 14-I through 27-I: Detailed Descriptions.

Scan mode Characteristics

0Channel up/down keys change channels only.

1Channel down below the lowest channel (or channel up higher than the highest) and TV turns off.

2

3

Channel down below the lowest channel (or up higher than the highest) and TV goes to FM radio. Channel down below lowest FM station (or Channel up higher than the highest) and TV channels return.

Channel down below the lowest channel (or up higher than the highest) and TV goes to FM radio. Press channel down below lowest FM station (or Channel up higher than the highest) and TV turns off.

14-I. STRT CH IN SM

When set to 1, installs TV on/off event below the start channel at TV turn on.

15-I. SLEEP TIMER

When set to 1, the SLEEP TIMER feature may be used (but no message is displayed prior to turn- off). When set to 0, the sleep timer is not available.

16-I. EN. TIMER

Set to 1, timer function is available to user. Set to 0 to disable timer functions. (Clock must be set in order to use Timers.)

17-I. ALARM

Gives you the option of making the alarm function available to the user. Set to 1, alarm function is available to user. Set to 0 to disable the Alarm function.

Note: Clock must be set in order to set the Alarm.

18-I. RADIO

Set to 1, for TVs with a Radio. Set to 0 to disable the Radio function, for TVs without a Radio.

19-I. NOT USED

20-I. FEATURE LEVEL

Default set to ZEN 1 for Zenith IR remote control operation. Set O, P LBL for Zenith Private Label IR remote control operation.

Warning: Do not set to “0” or remote will not control TV.

Installer should leave item 20

FEATURE LEVEL set to 1 (default).

21-I. V-CHIP

Set to 1 to activate V-Chip (Parental Control); have it available to user to filter, control, or restrict programming content. Set to 0 to turn V-Chip feature off, not available to user; no programming restrictions can be set.

22-I. MAX BLK HRS

Set to 0 to 99 for the maximum V-Chip (Parental Control) block hours. Default is 12 blocking hours.

23-I. CAPTION LOCK

Set to 1 to restore previous caption On/Off state after TV turns off. When set to 0, captions are always off, when TV is initially turned on.

24-I. TEXT MODE

Determines whether TEXT 1, TEXT 2, TEXT 3, or TEXT 4 decoding is enabled when TEXT is turned on (either from the Setup Menu or directly with CC on the remote). TIP: Set Text Mode to 1 only if text is offered in your video System.

25-I. FUNCTION PRE.

Set to 0 to suppress CHANNEL PREVIEW from the FUNCTION menu with some Pay-Per-View systems.

26-I. 6 KEY SYS

Set to 1 for 6-key front control panels. Set to 0 for 10-key front control panels. Leave default set to 1.

27-I. HOSPITAL MODE

The default is 2 (which favors most hospitals). With this setting two things are affected: Channel Banks 1, 2, and 3 are accessible, while Bank 4 is inactive.

Hosp. Mode=0 Not hospital mode. IR code depends on Item 20-I.

“Inactive TV” features not available.

Hosp. Mode= 1 Zenith P.L. IR Code (Bed 1) Hosp. Mode= 2 Zenith IR Code (Bed 2)

Page 35