External Control Device Setup
25. PIP Input Select (Command2:y)
GTo select input source for sub picture in PIP mode.
Transmission
[k][y][ ][Set ID][ ][Data][Cr]
Data 0 | : RGB | 4 | : DVI |
1 | : Component | 5 | : TV |
2 | : Video | 6 | : Video (Exp.) |
3 | : |
|
|
Acknowledgement
[y][ ][Set ID][ ][OK][Data][x]
26. Abnormal State (Command2:z)
G To recognize an abnormal state.
Transmission
[k][z][ ][Set ID][ ][FF][Cr]
Data FF:Read
Acknowledgement
[z][ ][Set ID][ ][OK][Data][x]
Data 0: Normal (Power on and signal exist)
1:No signal (Power on)
2:Turn the monitor off by remote control
3:Turn the monitor off by sleep time function
4:Turn the monitor off by
5:5V down
6:AC down
7:Turn the monitor off by Fan Alarm function
8:Turn the monitor off by off time function
9:Turn the monitor off by auto off function a: Turn the monitor off by AV board detect
27.ISM Method (Command2:p)
G To avoid having a fixed image remain on screen.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data | 0: Normal | 2: Orbiter | |
| 1: White wash | 3: Inversion | |
Acknowledgement |
|
| |
|
|
|
|
[p][ | ][Set ID][ ][OK][Data][x] |
|
|
|
|
|
|
28. Low Power (Command2:q)
G To control the low power function on/off.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data 0: Low power off 1: Low power on
Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
29. Orbiter Time Setting (Command2:r)
G To adjust orbiter operation time term.
Transmission
[j][r][ ][Set ID][ ][Data][Cr]
Data Min: 1 ~ Max: FE
Acknowledgement
[r][ ][Set ID][ ][OK][Data][x]
30. Orbiter Pixel Setting (Command2:s)
G To adjust pixel number in orbiter function.
Transmission
[j][s][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 9
Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
31.Picture Size Setting for Double Window mode (Command2:t)
G To adjust main window size in Double Window mode.
Transmission
[j][t][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
•Refer to ‘Real data mapping1’. See page 35. Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
32. Auto Configure (Command2:u)
G To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 1: To set
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
38 Plasma TV
