Cisco Systems 7906G, 7911G Verifying the Phone Startup Process, Configuring Startup Network Settings

Chapter3 Setting Up the Cisco Unified IP Phone
Verifying the Phone Startup Process
3-16
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager
OL-10008-01
Verifying the Phone Startup Process
After the Cisco Unified IP Phone has power connected to it, the phone begins its
startup process by cycling through these steps.
1. These buttons blink or flash on and off:
– Handset light strip
– Hold button
– Applications Menu button
2. The screen displays the Cisco Systems, Inc., logo screen.
3. These messages appear as the phone starts:
– Configuring IP
– Updating CTL
– Verifying Load
– Configuring CM List
– Registering
4. The main LCD screen displays:
– Current date and time
– Directory number
– Softkeys
If the phone successfully passes through these stages, it has started up properly.
If the phone does not start up properly, see the “Resolving Startup Problems”
section on page 9-2.
Configuring Startup Network Settings
If you are not using DHCP in your network, you must configure these network
settings on the CiscoUnified IP Phone after installing the phone on the network:
•IP address
•IP subnet mask
•Default gateway IP address