4-21
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager
OL-10008-01
Chapter4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Ethernet Configuration Menu
The Ethernet Configuration menu displays whether the Span to PC Port option is
enabled on the phone (CiscoUnified IP Phone 7911G only). Ta ble 4-9 describes
the option.
Security Configuration Menu
The Security Configuration menu displays settings that relate to security for
phone.
You can view additional security information and unlock the CTL file from the
Security Configuration screen on a phone. For more information, see the
“Security Configuration Menu” section on page7-2.
Table 4 -10 describes the Security Configuration menu options.
Table4-9 Ethernet Configuration Menu Option
Option Description To Change
Span to PC Port
(applies to 7911G
only)
Indicates whether the phone will
forward packets transmitted and
received on the network port to the
access port.
Enable this option if an application that
requires monitoring of the phone’s
traffic is being run on the access port.
These applications include monitoring
and recording applications (common in
call center environments) and network
packet capture tools that are used for
diagnostic purposes.
Use Cisco UnifiedCallManager
Administration to modify.