4-5
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager
OL-10008-01
Chapter4 Configuring Settings on the Cisco Unified IP Phone
Overview of Options Configurable from a Phone
•To enter a period (for example, in an IP address), press the . (period) softkey
or press * on the keypad.
•Press the << softkey if you make a mistake. This softkey deletes the character
to the left of the cursor.
•Press the Cancel softkey before pressing the Save softkey to discard any
changes that you have made.
Note The Cisco Unified IP Phone provides several methods you can use to reset or
restore option settings, if necessary. For more information, see the “Resetting or
Restoring the CiscoUnified IP Phone” section on page 9-15.
Related Topics
•Displaying a Configuration Menu, page4-2
•Unlocking and Locking Options, page4-3
•Overview of Options Configurable from a Phone, page4-5
•Network Configuration Menu, page 4-7
•Device Configuration Menu, page4-15
Overview of Options Configurable from a Phone
The settings that you can change on a phone fall into several categories, as shown
in Table 4 -1. For a detailed explanation of each setting and instructions for
changing them, see the “Network Configuration Menu” section on page 4-7.
Note There are several options on the Network Configuration menu and on the Device
Configuration Menu that are for display only or that you can configure from
Cisco UnifiedCallManager. These options are also described in the “Network
Configuration Menu” section on page4-7 and the or the “Device Configuration
Menu” section on page 4-15.