Cisco Systems 7906G, 7911G Adding Phones with Cisco Unified CallManager Administration

Chapter2 Preparing to Install the Cisco Unified IP Phone on You r Network

Adding Phones to the CiscoUnified CallManager Database

2-14

Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager

OL-10008-01

Note Cisco Unified CallManager automatically disables auto-registration if you

configure the cluster-wide security mode for authentication and encryption

through the Cisco CTL client.

Refer to Bulk Administration Tool User Guide for CiscoUnified CallManager for

more information about BAT and about TAPS.

Related Topics

•Adding Phones with Auto-Registration, page2-12

•Adding Phones with CiscoUnified CallManager Administration, page 2-14

•Adding Phones with BAT, page 2-15

Adding Phones with Cisco Unified CallManager Administration

You can add phones individually to the CiscoUnified CallManager database

using Cisco UnifiedCallManager Administration. To do so, you first need to

obtain the MAC address for each phone.

For information about determining a MAC address, see the “Determining the

MAC Address of a Cisco UnifiedIP Ph one” section on page 2-15.

After you have collected MAC addresses, choose Device > Add a New Device in

Cisco Unified CallManager Administration to begin.

For complete instructions and conceptual information about CiscoUnified

CallManager, refer to Cisco Unified CallManager Administration Guide and to

Cisco Unified CallManager System Guide.