Chapter 7. Administration

Under Administration, you

apply your configuration

define administrator users and change their passwords

save the preliminary configuration to file

load a saved configuration

view the configuration

reboot your 3Com VCX IP Telecommuting Module

restart the SIP module on your 3Com VCX IP Telecommuting Module

upgrade your 3Com VCX IP Telecommuting Module

set table formats

set date, time, and time zone (manually or via NTP)

Save/Load Configuration

Here, you work with the preliminary and permanent configurations, save them and load new configurations from previously saved configurations.

Test Preliminary Configuration

The settings you make in the web GUI will not be used automatically, but you must apply them first. When there are settings which are not yet applied, a warning about this will be shown on the web pages.

When Apply configuration is pressed, the Telecommuting Module will test the configura- tion before you make it permanent.

During test, the Telecommuting Module waits for you to press one of the three buttons displayed. If you never see the three buttons, something in your preliminary configuration (now tested) is wrong, which makes it impossible for you to access the configuration web interface.

Duration of limited test mode

Here, you enter the time limit for the testing. If you do not press any button within this time, the Telecommuting Module will assume that some part of your preliminary configuration makes connecting impossible. When the timeout is reached, the Telecommuting Module

103

Page 111
Image 111
HP VCX Software manual Administration, Save/Load Configuration, Test Preliminary Configuration, Duration of limited test mode