Chapter 15. Command Line Reference
Authentication for SNMP requests v3.
Field Name | Field Type |
authentication | snmpv3_auth_sel |
password | SnmpPassword |
privacy | snmpv3_privacy_sel |
user | NonWhiteName |
Explanation
Authentication algorithm used for this user. The password for this user.
Encryption algorithm used for this user. A user allowed to make SNMP requests.
monitor.syslog_servers
Corresponding setting in web GUI: Syslog Servers on page Log Sending
Table type: Dynamic
A list of syslog servers where log messages should be sent.
Field Name | Field Type | Explanation |
server | DnsDynIpReachableHost | A server name or IP address. |
monitor.watchdogs
Corresponding setting in web GUI: Automatic Restart of the SIP Module on page Restart
Table type: Single row
Watchdog settings.
Field Name | Field Type | Explanation |
enabled | OnOffToggle | Turns this watchdog on or off. |
service | NonWhiteName | The service monitored. |
network.alias_addresses
Corresponding setting in web GUI: Alias on pages Interface (Network Interface 1 and 2)
Table type: Dynamic
A list of extra Ingate IP addresses on the networks defined in the ’db.network.local_nets’ table.
Field Name | Field Type | Explanation |
address | DnsIpAddress | The IP address to use. |
interface | InterfaceSel | The interface to which the network is |
|
| connected. |
name | Name | A name for this IP address. It is used to |
|
| refer to the IP address. |
network.extra_default_gateways
Corresponding setting in web GUI: Additional Default Gateways on page Default Gateway
Table type: Dynamic
A list of extra Ingate IP addresses on the networks defined in the ’db.network.local_nets’ table.
260