|
| Chapter 15. Command Line Reference |
Field Name | Field Type | Explanation |
ip | OptDnsReachableHost | An IP address. |
sip.radius_acct
Corresponding setting in web GUI: RADIUS Accounting on page Authentication and Ac- counting
Table type: Single row
RADIUS accounting in the Telecommuting Module.
Field Name | Field Type | Explanation |
enabled | OnOffToggle | Turns the setting on or off. |
sip.recurse_on_3xx_in_b2bua
Corresponding setting in web GUI: Class 3xx Message Processing on page Routing
Table type: Single row
Enables recursion on 3xx in the B2BUA, instead of the proxy, if recursion is enabled in reply_config.
Field Name | Field Type | Explanation |
enabled | OnOffToggle | Turns the setting on or off. |
sip.registrar_limits
Corresponding setting in web GUI: Registrar Limits on page Local Registrar
Table type: Single row
Limitations for the
Field Name | Field Type | Explanation |
max_registrations MaxReg | The allowed number of registrations per | |
|
| user. |
max_users | OptNonNegativeInteger | The allowed number of registered users. |
registration_timeoutRegTimeout | Registration timeout (seconds). | |
sip.relay_rules
Corresponding setting in web GUI: Sender IP Filter Rules on page Filtering
Table type: Dynamic
Rules for processing SIP requests based on the source network.
Field Name | Field Type | Explanation |
action | sip_function_sel | The action to take for this request. |
client_netgroup | NetgroupReference | The source network of the request. |
279