Chapter 11. SIP Traffic

Static Registrations

You can specify that calls to a certain user address should also be redirected to another address, or that calls to a non-person user name (like support@company.com) should be redirected to one or more other addresses.

Static registrations only affect SIP requests addressed to Local SIP Domains.

Even if a call should be forwarded, the Telecommuting Module will try to put it through to the original addressee.

Note that this table should not be used for your own XF or XF/Register accounts. Use the User Routing table to forward calls for these accounts instead.

Requests To User

Enter the user address. Calls to this user are sent to the user, but also forwarded to users listed under Also forward to. The address should be entered on the form user@domain.

Also Forward To

User

Enter the address to which the calls should be forwarded. The address should be entered on the form user@domain. You can forward to more than one address by creating several rows for the same Request to user name.

You can add parameters to the destination address to limit what is sent to that user. Parame- ters are added after the address, separated by semicolon. The following parameters exist:

methods=: Enumerate the SIP methods that should be sent on to this user. If this parameter is not used, all requests are forwarded regardless of which method is used.

audio: Audio calls are forwarded to the user. Audio calls are defined as requests with an SDP where a "m=audio" line is present.

video: Video calls are forwarded to the user. Video calls are defined as requests with an SDP where a "m=video" line is present.

+sip.message: Requests are forwarded to the user if the body contains a line with "m=message" in it.

Example: If audio calls should

be

forwarded

to adam@sip.ingate.com,

enter

adam@sip.ingate.com;audio.

If

only

the

NOTIFY

and

SUB-

SCRIBE methods should be forwarded to emmie@sip.ingate.com, enter emmie@sip.ingate.com;methods=NOTIFY,SUBSCRIBE.

207

Page 215
Image 215
HP VCX Software manual Static Registrations, Requests To User, Also Forward To