HP VCX Software manual Display Load, Rst

		Chapter 9. Logging
S	SYN	Request for connection
A	ACK	Response to a previous packet
U	URG	Contains out-of-band data
P	PUSH	Packets that must be delivered quickly
F	FIN	Disconnect request
R	RST	Reset - response to incorrect packet

For more information on flags, see RFC 793.

When the clock is reset, the log shows this on a separate line like this:

If the Telecommuting Module is restarted, the log shows this on a line like this:

Display Load

On this page, you can see statistics on the traffic load to and from the Telecommuting Mod- ule’s interfaces and the memory and CPU load.

Once every 10 seconds, the load on all interfaces is scanned and saved to a local file. Ev- ery file contains 240 samples and a file generation consists of 42 files and has a size of approximately 20 MB. The first generation of files contains samples for the last week (ap- proximately). Every new file generation is created by merging two consecutive samples, enabling the storing of samples for the double time period in the same disk space. Merg- ing the samples include calculation of the minimum, average and maximum values for the time interval covered by the samples. After ten generations (about 3 years) the samples are deleted.

145