Chapter 4. How To Configure SIP

Save/Load Configuration

Finally, go to the Save/Load Configuration page under Administration and apply the new settings by pressing Apply configuration.

When the configuration has been applied, you should save a backup to file. Press Save config to CLI file to save the configuration.

Client Settings

SIP clients will use the Telecommuting Module as their outgoing SIP proxy and the SIP domain as the registrar.

DMZ/LAN Telecommuting Module, SIP server on the WAN

The simplest SIP scenario is when the SIP server is managed by someone else, and the Telecommuting Module SIP function is only used to traverse NAT.

Note that the Telecommuting Module must have a public (non-NATed) IP address for the SIP signaling to work correctly.

43