Chapter 15. Command Line Reference

traceroute

Usage: traceroute ip-addressdns-name

Check the route for a packet to a remote host. To use DNS names, a DNS server must be configured for the Telecommuting Module.

Modifying Tables

add-row

Usage: add-row table [field=value ...]

With this command, you add a row to a table and enter values into the listed fields for that row.

Note that this command cannot be used on tables with a fixed number of rows. These tables are marked with "Fixed" or "Single row" in the Table Definitions section.

clear-table

Usage: clear-table table

Remove all rows from a table.

Note that this command cannot be used on tables with a fixed number of rows. These tables are marked with "Fixed" or "Single row" in the Table Definitions section.

delete-row

Usage: delete-row table rowid [rowid ...]

With this command, you delete one or more rows from a table. You get row IDs with the dump-table command.

Note that this command cannot be used on tables with a fixed number of rows. These tables are marked with "Fixed" or "Single row" in the Table Definitions section.

describe-table

Usage: describe-table [--all] [table ...]

Describe a table (or all tables) with its fields and field types.

dump-table

Usage: dump-table [--all] [--single-line] [table ...]

With this command, you show the contents of one or more tables. This is done as a number of commands that will re-create the data.

For tables with a fixed number of rows, a number of modify-row commands will be shown. For tables with a dynamic number of rows, there will be a clear-table command followed by a number of add-row commands.

The --all flag will make the Telecommuting Module show all tables. When this flag is used, you must not enter a table name.

238