Chapter 14. Basic Administration

Is this configuration correct (yes/no/abort)?

yes will make the Telecommuting Module reboot using the new settings.

no will make the Telecommuting Module go through the Basic configuration questions again and allow you to change settings.

abort will make the Basic configuration script end without changing any settings.

Save/Load configuration

Here, you can save your configuration to a file or load a configuration from a file. The transfer is made using the Zmodem protocol, which can be found in terminal software such as Hyperterminal.

Load preliminary configuration

The configuration file selected here will be uploaded as a preliminary configuration. The permanent configuration will not be affected.

To load the configuration, select this alternative and then start the transfer in your terminal program.

Load both configurations and apply

The configuration file selected here will be uploaded as both the preliminary and the permanent configuration. When the upload is finished, the configuration will be applied.

To load the configuration, select this alternative and then start the transfer in your terminal program.

Save preliminary configuration

Save the preliminary configuration to a file. If your terminal program starts the transfer automatically, the file will be named config.cfg.

Save permanent configuration

Save the permanent configuration to a file. If your terminal program starts the transfer auto- matically, the file will be named config.cfg.

Main menu

Select this alternative to return to the main menu.

Wipe email logs

Here, you can erase all log messages queued for sending via email to one or more receivers. This could be useful if you by mistake made settings where lots of events are logged via email, which fill the queue rapidly.

234