HP VCX Software manual Data Interfaces, Network, Additional Negotiators

Chapter 8. Network Configuration

since the Telecommuting Module assumes that they are both on the same side of the fire- wall.

For DMZ and LAN SIParators, at least one network should be listed here. If no networks are listed, the Telecommuting Module will not perform NAT for any traffic.

Network

Select a network. The alternatives are the networks you defined on the Networks and Com- puters page.

Additional Negotiators

Sometimes you have SIP devices on a different network that needs to negotiate for this network. This happens when there is a SIP server on one network, and SIP-unaware phones on another. In this case, select the phone network under Network, and the SIP server as an Additional Negotiator. Select from the networks defined on the Networks and Computers page.

Delete Row

If you select this box, the row is deleted when you click on Create new rows or Save.

Create

Enter the number of new rows you want to add to the table, and then click on Create.

Data Interfaces

Settings in the Data Interfaces table are only required when the Telecommuting Module has been made the WAN type.

Between the Data Interfaces listed here, the Telecommuting Module will act as a plain router, and only forward traffic, with the exception that QoS will be performed if configured for the traffic in question.

The traffic sent between Data Interfaces will not be logged by the Telecommuting Module.

The Telecommuting Module will only send SIP traffic between the other interfaces.

134