HP VCX Software manual LAN Telecommuting Module, Client Settings

Chapter 4. How To Configure SIP

When the configuration has been applied, you should save a backup to file. Press Save config to CLI file to save the configuration.

Client Settings

SIP clients will use the Telecommuting Module as their outgoing SIP proxy and the SIP domain as the registrar.

LAN Telecommuting Module

For various reasons, you might want to use a separate SIP server instead of the built-in server in the Telecommuting Module. That SIP server would be located on the inside or maybe on a DMZ.

With the LAN Telecommuting Module, you connect the Telecommuting Module to a NATed network.

Here are the settings needed for this. It is assumed that the Telecommuting Module already has a network configuration. Only the additional SIP settings are listed.

Networks and Computers

The Telecommuting Module must know the network structure to be able to function properly. On the Networks and Computers page, you define all networks which the Telecommuting Module should serve and which are not reached through the default gateway of the firewall.

49