HP VCX Software manual Radius Accounting, Use Dial Plan, Emergency Number

Chapter 11. SIP Traffic

RADIUS Accounting

RADIUS Accounting can be used to keep track of user calls. This enables billing users for SIP calls.

When RADIUS Accounting is turned on, the Telecommuting Module sends account ticks to notify the configured RADIUS server about when calls start and stop. RADIUS Accounting is defined in RFC 2866.

When RADIUS Accounting is used, you must also enter a RADIUS server on the RADIUS page under Basic Configuration.

Save

Saves the Authentication and Accounting configuration to the preliminary configuration.

Cancel

Reverts all of the above fields to their previous configuration.

Dial Plan

The Dial Plan lets you route incoming SIP calls based on the incoming From header and Request-URI.

When neither the Advanced SIP Routing nor the SIP Trunking module has been installed, this page presents only limited functionality.

General

Use Dial Plan

The Dial Plan can be turned On, Off or used in Fallback mode. In fallback mode, the Dial Plan is inactive unless a particular SIP server to be routed to is out of order. As a backup, the Dial Plan then becomes active.

Emergency Number

Enter the emergency phone number for your country (like 112 or 911). Calls to this number will be allowed even if all SIP traversal licenses are used up.

195