HP VCX Software manual Qos.ingressqueueing, Qos.sipcac, Qos.status, Qos.tagging

Chapter 15. Command Line Reference

qos.ingress_queueing

Corresponding setting in web GUI: Classification on page QoS Interfaces

Table type: Dynamic

Assign priority and bandwidth for different types of traffic.

Field Name	Field Type	Explanation
cname	QoSClassReference	The traffic for which bandwidth is assigned
		or limited.
interface	InterfaceSel	The interface for the outgoing traffic.
limit	OptPercentFloat	Bandwidth limit (kbit/s).
queue	pqueue_sel	Priority queue for the traffic.
rate	OptPercentFloat	Bandwidth assignment (kbit/s).

qos.sip_cac

Corresponding setting in web GUI: Call Admission Control, Codec Bandwidths on page QoS and SIP

Table type: Single row

Call Admission Control settings.

Field Name	Field Type	Explanation
enabled	OnOffToggle	Use Call Admission control.

qos.status

Corresponding setting in web GUI: Type of QoS on page QoS Interfaces

Table type: Fixed

Global QoS settings.

Field Name	Field Type	Explanation
prio_save	Percent	Save this amount of bandwidth for lower
		priority traffic.
type	qostype_sel	Type of QoS to use.

qos.tagging

Corresponding setting in web GUI: TOS/DSCP Modification on page TOS Modification

Table type: Dynamic

A list of traffic to mark up by setting the TOS or DSCP field.

Field Name	Field Type	Explanation
cname	QoSClassReference	The traffic to mark up.
dscp	OptDSCPInteger	Set the DSCP field.
tos	opttos_sel	Set the TOS field.

267