Chapter 6. Basic Configuration

User

Enter a username which the server should use when contacting the Telecommuting Module.

Password

Press the Change password button to enter a password for this user.

Authentication

Select the authentication algorithm to use for SNMP requests. 3Com VCX IP Telecommut- ing Module supports the MD5 and SHA-1 algorithms.

Privacy

Select whether the SNMP request should be encrypted using AES or DES, or not be en- crypted at all.

Delete Row

If you select this box, the row is deleted when you click on Create new rows, Save, or Look up all IP addresses again.

Create

Enter the number of new rows you want to add to the table, and then click on Create.

SNMP Traps

If Trap sending function is On, the Telecommuting Module will send messages (traps) to the server(s) entered below whenever an SNMP authentication fails or the Telecommuting Module boots. They are also sent when the status is changed for an IPsec tunnel, and when the Telecommuting Module discovers that a new software version is available.

You can also configure the unit to send traps when certain levels are reached (see Resource Monitoring).

SNMP traps are sent from the IP address closest to the receiving SNMP server. If the Telecommuting Module has been assigned more than one IP address on that network, the address given in the Directly Connected Networks table will be used.

If the trap sending is disabled, no traps will be sent.

89

Page 97
Image 97
HP VCX Software manual Snmp Traps, User, Password, Authentication, Privacy