HP VCX Software manual Configuring 3Com VCX IP Telecommuting Module, Logging on, Log on again

Chapter 3. Configuring 3Com VCX IP Telecommuting Module

You connect to your 3Com VCX IP Telecommuting Module by entering its name or IP address in the Location box of your web browser.

Logging on

Before you can configure the Telecommuting Module, you must enter your administrator username and password or RADIUS username and password. The admin user is predefined with complete administration privileges.

Log on again

If you have a web connection for Telecommuting Module configuration that is inactive for more than 10 minutes, you must enter the password again and click on one of the buttons Keep changes below and Abandon changes below.

On all pages where changes have been made, the two buttons Keep changes below and Abandon changes below will be shown when you log on again. Keep changes below con- nects you to the Telecommuting Module and stores the preliminary configuration you have changed. Abandon changes below connects you to the Telecommuting Module and dis- cards the changes you have made on this page.

On pages where nothing has been changed, the Log in again button is displayed. Enter the password and click on the button to re-connect to the Telecommuting Module.

The Telecommuting Module’s encryption key is changed every 24 hours. If you have a web connection for Telecommuting Module configuration when this happens, you must enter the password again. This works in the same way as when your connection has been inactive for more than 10 minutes (see above).

17