Chapter 9. Logging

From Header

Enter one or more URIs that appear in the From headers for the event you want to examine. The From headers typically contain usernames and domains, like george@ingate.com.

To Header

Enter one or more URIs that appear in the To headers for the event you want to examine. The To headers typically contain usernames and domains, like george@ingate.com.

Show internal SIP signaling

The Telecommuting Module often loops SIP messages to itself when processing and routing SIP signaling. Normally, the looped messages are not shown, but when this checkbox is checked, the log will display all steps in the message processing.

Time Limits

On the right-hand side of the boxes, select time interval and order for the log display.

Show log from

You can limit the selection by a time interval.

The date is written as a year with two or four digits, month (01-12) and day (01-31). The optional punctuation between year, month and day must be dash (-). Time is written as two digits for the hour, two digits for the minute and possibly two digits for the second, although the seconds can be left out. The optional punctuation between hours, minutes and seconds must be colon (:) or period (.).

You can enter a date, a time or both to set a start time for the log display. If you leave the date field blank and enter a time in the corresponding time field, today’s date is used. If you leave the time field blank and enter a date in the date field, the time is set to 00:00:00. If both fields are left blank, all events back to the log start will be displayed.

Show log until

You can enter a date, a time or both to set an end time for the log display. If you leave the date field blank and enter a time in the corresponding time field, today’s date is used. If you

142