Chapter 7. Administration

Always have an Edit column

Regardless of the table size, all tables will have an Edit Row column.

Sometimes have an Edit column

Only the tables of the size entered below will have an Edit Row column.

Never have an Edit column

Regardless of the table size, no table will have an Edit Row column.

Tables with at least this many rows have an Edit column

This is an additional setting which only takes effect if you selected Sometimes have an Edit column above. Tables with at least the number of rows as you enter in the box will have an Edit Row column. Tables with less rows than this are changeable directly.

The standard setting for new 3Com VCX IP Telecommuting Modules is Tables with at least 10 rows have an Edit Row column.

It is not advisable to enter a value higher than 15 here, or the web browser won’t be able to satisfactorily manage the tables.

Save

Saves the Table Look configuration to the preliminary configuration. The change takes effect immediately.

Cancel

Reverts to the previous table configuration.

Date and Time

Set the Telecommuting Module clock to ensure that the information in the logs has the right date and time. The date and time are displayed at the bottom of all pages. You can set the date and time manually or let the Telecommuting Module get the correct time from an NTP server.

Note that the Telecommuting Module will use these time settings when deciding whether a time class is active or not. If you change settings, configuration controlled by time classes will be affected.

Change Time Zone

Before you change the time in the Telecommuting Module, check that it uses the correct time zone. A change of time zone only affects the time displayed on the Telecommuting Module web pages; the Telecommuting Module clock is not changed. An effect of a time zone change is that time classes are applied differently, as they are used according to the time shown on the web pages.

113