HP VCX Software manual Subno, Replacement URI

Chapter 11. SIP Traffic

Name

This is the name for this destination. The name is used in the Dial Plan table.

Subno.

This field is used to sort rows within this destination group. The rows are used in the dis- played order.

If the first receiver does not respond, or if the Telecommuting Module receives a 5xx or 6xx response, the request is sent to the receiver on the next row.

This column is only available when the Advanced SIP Routing or the SIP Trunking module has been installed.

Account

Select an account from the User Routing table to where the request should be sent.

This column is only available when the Advanced SIP Routing or the SIP Trunking module has been installed.

Replacement URI

Instead of routing the request to a defined user, you can enter a new Request-URI for the request. Enter the new URI here.

With this setting, you can only change the domain part of the Request-URI, not the user part.

Port

Enter the port to where the request should be sent.

Transport

Select which transport should be used to send the request.

Reg Expr

Instead of routing the request to a defined user, or entering a fixed Request-URI, you can create a regular expression which forms a new Request-URI. The regular expression is built from subexpressions from the Matching Request-URI table. To use this, regular expres- sions must be used on the corresponding row in the Matching Request-URI table.

Subexpressions are numbered in the order of their starting parenthesis and referred to as $number. In the expression (sip:(.+))@3com.com, which matches any Request-URI like sip:user@3com.com, there are two referable subexpressions: sip:user, which is referred to

199