Chapter 15. Command Line Reference
This is a reference for the Command Line Interface (CLI), which can be accessed via the serial console or SSH (see the chapter titled Basic Administration).
Command Reference
Here is a list of the commands available in the Command Line Interface (CLI).
Commands are presented like this: command
ping
--flag means that the flag can modify the command in some way.
parameter1 means that the parameter1 (like
parameter1parameter2 means that either parameter1 or parameter2 can be used.
[parameter3] means that this parameter is optional.
parameter3 ... means that this type of parameter can be used multiple times.
Help and Troubleshooting
help
Usage: help [command ...]
When this command is given without parameters, you get a list of available commands and tips about how to exit and how to interrupt a command.
If you enter a command, you will get information about how to use that command.
list-errors
Usage:
List errors in a table. If no table name is entered, all errors in tables in the preliminary configuration are listed.
With the
ping
Usage: ping
Check if a host is reachable using ICMP Echo Request (ping). To use DNS names, a DNS server must be configured for the Telecommuting Module.
terminal-coding
Usage:
Sets the character encoding used by the terminal. Supported encodings are ascii,
237