Chapter 15. Command Line Reference
The log class for DHCP packets received by the Ingate.
Field Name | Field Type | Explanation |
logclass | LogclassReference | A log class. |
firewall.network_groups
Corresponding setting in web GUI: Networks and Computers on page Networks and Computers
Table type: Dynamic
In this table all groups of computers/IP addresses are defined, to be used when configuring the rest of the Ingate.
Field Name | Field Type | Explanation |
interface | OptVlanIfReference | The interface or VLAN of the Ingate on |
|
| which this IP range is located. |
lower_ip | OptDnsIpAddress | The first IP address in the range for this |
|
| group. |
name | GroupName | A name of the network group. It is used |
|
| when referring to it from this or other tables. |
subgroup | SubGroup | A reference to the ’name’ field. Used when |
|
| building a network group from multiple |
|
| other groups. |
upper_ip | OptDnsIpAddress | The last IP address in the range for this |
|
| group. This field can be left empty if the |
|
| group is a single IP address. |
firewall.own_logclass
Corresponding setting in web GUI: Log class for packets to the Telecommuting Module on page Logging Configuration
Table type: Single row
The log class for packets addressed to the Ingate.
Field Name | Field Type | Explanation |
logclass | LogclassReference | A log class. |
firewall.ping_policy
Corresponding setting in web GUI: Policy For Ping To Your 3Com VCX IP Telecommuting Module on page Basic Configuration
Table type: Single row
This setting specifies how the Ingate should reply to ping packets to its own IP addresses.
246