HP VCX Software manual Basic Settings

Chapter 4. How To Configure SIP

One effect of this is that traffic between two users on different networks, or between one of the listed networks and a network not listed here, is NAT:ed.

Another effect is that for connections between two users on the same network, or on net- works where neither is listed in Surroundings, no ports for RTP sessions will be opened, since the Telecommuting Module assumes that they are both on the same side of the fire- wall.

For DMZ and LAN SIParators, at least one network should be listed here. If no networks are listed, the Telecommuting Module will not perform NAT for any traffic.

Basic Settings

Go to the Basic Settings page under SIP Services and turn the SIP module on. Here you also select log classes for SIP event logging.

35