HP VCX Software manual Radius Servers, Radius server, Port, Secret

Chapter 6. Basic Configuration

is used for user authentication from VPN connections, you must do additional configuration on the Authentication Server page.

The Telecommuting Module can also send accounting information about SIP calls to a RA- DIUS server.

RADIUS Servers

Enter the server(s) that the Telecommuting Module should use. When more than one RA- DIUS server is entered, make sure that their databases contain the same data, since the Telecommuting Module regards them all alike and uses the server which first replies to a request.

RADIUS server

Enter the DNS Name Or IP Address for the RADIUS server used for authentication.

In IP address, the IP address of the server is shown. It is updated whenever Look up all IP addresses again is pressed, or the DNS Name Or IP Address field is changed.

Port

The official port for RADIUS is UDP port 1812. However, several RADIUS servers use port 1645, so you may have to change the port number either on the RADIUS server or in the table.

Secret

A RADIUS authentication requires a ’shared secret’, which must be the same on both sides. Since the secret is used as an encryption key, it is important that it is kept a secret. Since the secret is saved unencrypted in the Telecommuting Module configuration, you should be careful with where you store the configuration.

Delete Row

If you select this box, the row is deleted when you click on Create new rows, Save, or Look up all IP addresses again.

Create

Enter the number of new rows you want to add to the table, and then click on Create.

83