Chapter 15. Command Line Reference
idsips.rate_limited_ips
Corresponding setting in web GUI: Rate Limiting on page SIP IDS/IPS
Table type: Dynamic
Table for user specified IDS/IPS rate limit rules.
Field Name | Field Type | Explanation |
blacklist_durationOptNonNegativeInteger | The blacklist interval (in seconds). | |
enabled | OnOffToggleOn | Turns this rule on or off. |
hits | hits_number | The number of hits inside the given window. |
logclass | IDSIPSLogclassReference How traffic matching this rule should be | |
|
| logged. |
method | SipMethodsReference | The SIP method to match on. |
name | IpsRuleName | |
number | Integer | The rule number. |
request_uri | OptString | The |
|
| regular expression. |
response | OptString | The SIP response to match on. Written as a |
|
| regular expression. |
source_netgroup | OptNetgroupReference | The source network for the traffic. |
window | window_number | Time interval (in seconds) for hits. |
ipsec.crypto_def
Corresponding setting in web GUI: Crypto Definitions on page IPsec Cryptos
Table type: Dynamic
Field Name Field Type | Explanation |
ipsec.esp_proposals
Corresponding setting in web GUI: ESP/IPsec (Phase 2) Encryption Proposals on page IPsec Cryptos
Table type: Dynamic
Field Name Field Type | Explanation |
ipsec.espah_logclass
Corresponding setting in web GUI: Log class for ESP packets on pages IPsec Settings and Logging Configuration
Table type: Single row
The log class for ESP packets.
249