Chapter 15. Command Line Reference |
| |
Field Name | Field Type | Explanation |
enabled | OnOffToggle | Turns the setting on or off. |
fent.fent_keepalive
Corresponding setting in web GUI: NAT keepalive method, NAT timeout for UDP, NAT timeout for TCP on page Remote SIP Connectivity
Table type: Single row
Type of keepalive to use for fented clients.
Field Name | Field Type | Explanation |
tcp_timeout | PositiveSysInteger | Timeout for TCP - adapt to the NAT used |
|
| (seconds). |
type | fent_keepalive_sel | Use which method to keep fented clients |
|
| alive. |
udp_timeout | PositiveSysInteger | Timeout for UDP - adapt to the NAT used |
|
| (seconds). |
fent.map_signal_address
Corresponding setting in web GUI: Remote Clients Signaling Forwarding on page Remote SIP Connectivity
Table type: Single row
Map signaling address for remote users.
Field Name | Field Type | Explanation |
listen_ip | OptOwnIpReference | Incoming destination IP address. |
listen_port | OptPortNumber | Incoming destination port. |
send_ip | OptAliasIpReference | Outgoing source IP address. |
fent.media_release
Corresponding setting in web GUI: Media Route on page Remote SIP Connectivity
Table type: Single row
Route media directly between clients behind the same NAT.
Field Name | Field Type | Explanation |
enabled | OnOffToggle | Turns the setting on or off. |
fent.stun
Corresponding setting in web GUI: STUN Server on page Remote SIP Connectivity
Table type: Single row
Settings for the builtin STUN server.
244