ADT Security Services 3000 manual 8VLQJ3DQLF.H\V, To active a Panic Function

ARMEDREADY

3DQLF.H\V

8VLQJ3DQLF.H\V

Your system may have been programmed to use special keys to manually activate emergency (panic) functions as follows:

This Function	Sends this signal*	With This Sounding…
Silent Alarm	silent alarm	no audible alarm or any visual display
		indicating that a silent alarm has been
		initiated.
Audible Alarm	audible alarm	a loud, steady alarm at touchpad(s)
		and at any external sounders that
		may be connected.
Personal Alarm	emergency alarm	steady alarm sound at touchpad(s),
		but not at external bells or sirens.
Fire Alarm	fire alarm	temporal (pulsing) sound at external
		bells and sirens.

*All panic functions send signals to the Customer Care Center, if connected.

To active a Panic Function:		6)%(=-7%61)(83%61
Press and hold down for at least 2 seconds whichever
lettered key on the touchpad has been programmed for
		English Display: READY
the desired emergency function.
OR	Typical%0%61Panic￿￿Display:
Press both keys of the assigned key pair at the same
time.

A

B

C

D

ARMED			READY
1	OFF	2	AWAY	3	STAY
4		5	TEST	6	BYPASS
7	INSTANT	8	CODE	9	CHECK
* READY		0		#

ZONE 95

6139-001-V0

English Display:

99 and ALARM

					PRESS BOTH KEYS
					OF DESIRED PAIR
					AT THE SAME TIME
1	OFF	2	AWAY	3	STAY
4		5	TEST	6	BYPASS
7		8		9	ZONE 96
	INSTANT		CODE		CHECK
* READY		0		#
	ZONE 99				6139ADT-002-V0

Lettered Panic Keys Panic Key Pairs

See your installer and use the chart provided in the Features Programmed in Your System section to note the functions that have been programmed for your system.

– 22 –