2. The touchpad begins beeping and displays the armed message. The red ARMED indicator also lights.
ADT3000-007-V0
#
9 CHECK
8 CODE
6LQJOH%XWWRQ·6WHSµ$UPLQJ
* READY
D
0
C
7 INSTANT
B
6 BYPASS
4
5
A
1 OFF
3 STAY
2 AWAY
1. Press and hold the assigned function key for 2 seconds (no code is required). Function keys are shown below.
Before arming, close all perimeter doors and windows.
$UPLQJWKH6\VWHP
6LQJOH%XWWRQ$UPLQJ
The “A”, “B”, “C”, and/or “D” keys on your touchpad may have been programmed for single-button arming. Note that while it will not be necessary to use a security code for arming, a security code must always be used to disarm the system.
If Single-Button Arming is programmed:6)%(=-7%61)(
• A function key has been assigned to a specific type of arming: STAY83%61mode, Night-STAY mode, AWAY mode, or STEP-ARMING (see Step-Arming paragraph).
• You DO NOT need to enter your user code before pressing the function key (you always need your user code to DISARM the system).
TEST 
English%61)(Display:%;%=READY
=391%=)<-823;
English Display: AWAY
Single-Button “Step” arming may have been programmed into one of the lettered keys (A, B, C, or D). Check with your installer to see if this has been done in your system.
If Step-Arming is programmed:
•The assigned key provides a choice of three levels of security.
•The selected key can be pressed once, twice, or three times, increasing the level of security with each press, as follows
Key | First Press | Second Press | Third Press |
Ø | Ø | Ø | Ø |
A, B, C, D | Armed-STAY | Armed Night-STAY | Armed-AWAY |
