ADT Security Services 3000 6%=83%61, SDVVLQJ3URWHFWLRQ=RQHV, 7%614677, 837,3*%9087, 7%61&=4%77

%\SDVVLQJ3URWHFWLRQ=RQHV

8VLQJWKH%<3$66.H\

Use this key when you want to arm your system with one or more zones intentionally unprotected. The system must be disarmed first.

When bypassing zones:

• Your system may have been set so that arming will not be possible if more than one zone is bypassed (check with your installer).

• The system must be disarmed before you can bypass zones.

• Bypassed zones are unprotected and will not cause an alarm if violated.

• The system will not allow fire zones to be bypassed.

• Zones are automatically unbypassed when the system is disarmed.

1.	+ 6 + zone numbers (see below)		(-7%61)(￿46)77
(Security Code)	BYPASS		￿837,3;*%9087
Enter the 2-digit zone number(s) for the zone(s) to be
			English Display:
bypassed (e.g., 06, 10, 13, etc.). Single digit zone
numbers must be preceded by a zero (e.g. 05, 06).		NOT READY
2. When finished, the touchpad will momentarily
			-7%61)(&=4%77
display a "Bypass" message for each bypassed zone
number. Wait for all bypassed zones to be displayed.			6)%(=83%61

Arm the system as usual.

English Display: BYPASS

To display bypassed zones prior to arming, enter your security code and press the [6] BYPASS key.

– 19 –