)XQFWLRQVRIWKH7RXFKSDGV
1.DISPLAY WINDOW.
Custom English Display Touchpads: 2- line,
English Display Touchpads: Display protection zone ID and system status messages using
2. | 1 OFF | Disarms burglary portion of the |
system, silences alarms and audible trouble indicators, and clears visual display after problem's correction.
3. 2 AWAY Arms the entire burglary system,
perimeter and interior.
4.3 STAY Arms perimeter portion of burglary
system only. Interior protection is not armed, allowing movement within premises without causing an alarm.
5.4 This is not a Function key. Used only as a numeric key.
6.5 TEST Tests the system and alarm
sounder if disarmed. Refer to Testing The System section for test procedures.
7.6 BYPASS Removes individual protection zones from being monitored by the system.
8.7INSTANT Arms in manner similar to the
STAY mode, but without the entry delay feature. Entering via an entry/exit door will cause an instant alarm.
9.8 CODE Used to assign additional user codes for other users of the system.
10. 9 CHIME Turns CHIME mode on and off.
When on, the opening of windows or doors while the system is disarmed will sound 3 beeps at the touchpad(s).
11.✱ READY Used to display all open protection zones.
12.# This key can be used for "Quick
Arming" of the system without use of a security code (if programmed).
13.KEYS
14.READY INDICATOR: (GREEN) Lit when the system is ready to be armed (no faults present). While the system is disarmed, this indicator will go on and off as protection zones are closed and opened.
15.ARMED INDICATOR: (RED) Lit when the system has been armed.
16.INTERNAL SOUNDER: The
17.FUNCTION KEYS: Keys A, B, C, D may have been programmed for a variety of functions, including panic (emergency) functions. For details, see the Function Keys section.
†Note: Keys
1OFF
through
3STAY
and
2AWAY
through
7INSTANT
each perform their
associated companion system functions (OFF, STAY, AWAY, INSTANT, etc.) when preceded by an entry of the security code (as described later).
– 10 –